Questions about choosing a lubricant
Answers to the most frequently asked questions about industrial lubricants, grouped by topic. The guidance is general in nature: for each machine, the manufacturer's instructions always come first.
How do you choose the right viscosity for an industrial oil?
The main reference is the manufacturer's manual, which specifies the viscosity grade suited to the speeds, loads and temperatures of that component. In general, slow and heavily loaded components require more viscous oils, while fast components or circuits with tight clearances require thinner oils. An oil that is too thin does not protect enough; one that is too viscous runs hotter, absorbs more energy and circulates poorly at cold start.
Is a synthetic lubricant always better than a mineral one?
Not necessarily. Synthetics offer real advantages in demanding conditions, such as very high or very low temperatures and extended change intervals, but they are not always needed. A good mineral oil is often the most balanced choice for normal applications. The compatibility of some synthetics with seals, paints and the product already in the machine should also be checked.
Can different lubricants be mixed?
It is best avoided. Even oils with the same viscosity may contain incompatible additives, with the risk of deposits, foaming or loss of performance. Some synthetic bases, such as many polyglycols, are not miscible with mineral oils. Greases with different thickeners can also soften or harden when mixed. When changing product, it is advisable to drain, flush if necessary and ask the supplier for confirmation.
When should you use an oil and when a grease?
Oil is preferable when heat must be removed, at high speeds, in circulation systems or when the lubricant must be filtered. Grease is preferable when the lubricant must stay at the point of application, protect against the ingress of dust and water and work for long periods without top-ups, as in many bearings, joints and open mechanisms.
What does it mean when a lubricant is biodegradable?
It means that, in standardised laboratory tests, the product is broken down by microorganisms to a defined extent within a defined time. For applications at risk of release into the environment, low toxicity and the fact that the product does not accumulate in organisms are also considered. A biodegradable lubricant reduces the impact of any leaks, but leaks must still be prevented and collected.
Questions about management and maintenance
How often should the oil in an industrial machine be changed?
The intervals given by the manufacturer are the starting point. They may, however, be shortened in severe conditions, such as high temperatures, dusty or damp environments and continuous operation. A more advanced approach is to change the oil based on its actual condition, verified by periodic analysis, avoiding both overly frequent changes and oils left in service longer than they should be.
What is oil analysis used for?
Analysing a sample of in-service oil provides three types of information: the condition of the lubricant, such as viscosity and level of oxidation; the presence of contaminants such as water, dust or fuel; and the metal particles produced by component wear. Repeated over time, it makes it possible to identify problems before they become failures and to optimise change intervals.
How should oils and greases be stored correctly?
In covered, dry areas at as constant a temperature as possible, in their original closed and labelled containers, on containment trays for any leaks. If drums must be kept outdoors, they should be laid on their side with the bungs horizontal or covered, to prevent rainwater from getting in. It is useful to use older stock first and to dedicate pumps and transfer containers to each product.
Why does oil turn milky or foamy?
A milky appearance usually indicates water emulsified in the oil, which has entered through condensation, leaks or washing. Foam can be caused by air ingress, an incorrect level, contamination or mixing with different products. In both cases the oil lubricates less effectively: the cause must be found and corrected, and replacing the lubricant should be considered.
Can too much grease in a bearing cause damage?
Yes. In a bearing, especially a fast one, excess grease is continuously churned by the rolling elements, generates heat and can damage the seals, with the paradoxical result of speeding up the degradation of the lubricant. Quantities and intervals should be set according to the instructions of the bearing or machine manufacturer.
Questions about safety and the environment
What precautions should be taken when handling lubricants?
Avoid prolonged skin contact by wearing suitable gloves, especially with used oils and metalworking fluids, and protect your eyes when there is a risk of splashes. Wash your hands before eating and at the end of the shift, without using solvents. Clean up spills immediately, as they make floors slippery, and do not keep oily rags in your clothing pockets.
How are used oils disposed of?
Used oils are waste that must never be released into the environment, poured into drains or burned improperly. They must be collected in dedicated containers, without mixing them with other waste such as solvents, water or coolants, and handed over to authorised collectors, keeping the documentation required by law. Contaminated filters, rags and absorbents are also subject to specific rules.
What should you do in the event of an oil spill?
First of all, stop the leak if it can be done safely, and prevent the product from reaching drains, soil or waterways using barriers or absorbent materials. Then collect the product with suitable absorbents and dispose of the contaminated material as waste. It is useful to keep spill kits near storage and transfer points and to train staff in their use.
Are lubricants flammable?
Most industrial oils and greases have a high flash point, but they can still burn. The risk increases when oil is atomised, for example by a pressurised leak, or when it comes into contact with very hot surfaces. Sprays often contain flammable propellants. Oil-soaked rags should be collected in closed metal containers away from heat sources.
Where can you find information on the hazards of a lubricant?
In the safety data sheet provided by the producer or supplier, which sets out hazards, first-aid measures, fire-fighting and spill response, and guidance on handling, storage, personal protection and disposal. It must be available to the workers who use the product and should be taken into account in the company risk assessment, together with the technical data sheet.