What industrial lubricants are
Industrial lubricants are substances placed between surfaces in relative motion to reduce friction and wear. Without them, engines, gearboxes, bearings, hydraulic systems and chains would overheat and wear out in a very short time.
In the day-to-day running of a company, lubricant is often seen as a simple consumable. In reality it is a component of the machine in its own right: how it is chosen, stored and changed has a direct effect on the life of mechanical parts, on energy consumption and on how often breakdowns occur. Understanding the basics of lubrication helps people make better decisions and talk more effectively with machine manufacturers and suppliers.
Lubricants come in different forms: fluid oils, semi-solid greases, pastes, solid lubricants and dry film coatings. The most suitable form depends on the type of contact, speed, load, temperature and whether the lubricant can be renewed during operation.
The functions of a lubricant
Reducing friction is the best-known function, but not the only one. A good lubricant performs several tasks at the same time:
- Reducing friction and wear It separates the surfaces, fully or partly, and limits direct contact between the peaks of the metal surfaces.
- Cooling Circulating oils carry away the heat generated by friction and by the process, transferring it to radiators, heat exchangers or reservoirs.
- Corrosion protection The lubricant film and its additives protect metal surfaces from moisture and aggressive agents.
- Cleaning and carrying contaminants Oils carry particles and residues to the filters, keeping working surfaces clean.
- Sealing Greases and oils help to seal clearances and seals, preventing dust and water from getting in.
- Power transmission In hydraulic circuits the fluid is also the medium that transmits force and motion.
What a lubricant is made of
Almost all liquid lubricants consist of two parts: a base oil, which makes up most of the product, and a package of additives, which improves its performance or adds new properties. Greases add a third element, a thickener, which gives the product its semi-solid consistency.
Base oils
Mineral base oils are obtained by refining crude oil and remain the most widely used because of their good balance between performance and cost. Synthetic base oils, such as polyalphaolefins, esters, polyalkylene glycols and silicones, are produced by chemical synthesis and offer specific advantages: greater stability at high temperatures, better flow in the cold, longer change intervals or, in the case of some esters, good biodegradability. There are also base oils of vegetable origin, used above all where the risk of release into the environment is high.
Additives
Additives are substances added in varying amounts to give properties that the base oil alone does not have. The most common include antioxidants, which slow down the ageing of the oil; anti-wear and extreme pressure additives, which protect surfaces when the film becomes thinner; rust and corrosion inhibitors; antifoam agents; the dispersants and detergents typical of engine oils; viscosity index improvers and pour point depressants.
- The right productthe one specified by the manufacturer for each system.
- In the right amountneither too much nor too little: both mistakes cause damage.
- At the right timeat defined intervals or based on the actual condition of the oil.
The properties you need to know
Data sheets for industrial lubricants contain many values. Some of them are essential for making the right choice.
- Viscosity This is the fluid's resistance to flow and the most important parameter. For industrial oils, reference is made to the viscosity grades of the international classification, which are based on kinematic viscosity at 40 °C.
- Viscosity index It shows how much viscosity changes with temperature: the higher it is, the more consistently the oil behaves between cold and hot conditions.
- Pour point The lowest temperature at which the oil can still flow, useful for outdoor or cold-weather applications.
- Flash point The temperature at which the oil's vapours can ignite in contact with a flame: an important figure for safety and storage.
- Oxidation stability It describes the oil's resistance to chemical ageing, which determines its service life.
The main product families
- EarthmovingEngines, hydraulics, transmissions and greasing in severe conditions.
- RailwaysWheel-rail contact, axle boxes, gearboxes and compressors.
- Marine sectorMarine engines, propulsion and deck machinery.
- AutomotiveEngine oils, transmissions, greases and fluids for electric vehicles.
- Special machineryForestry machines, cranes, platforms, drilling rigs and municipal vehicles.
- Friction reductionLubrication regimes, wear and solid lubricants.
- Industrial greasesThickeners, consistency, compatibility and relubrication.
- GlossaryFifty technical terms explained in plain language.
- FAQFifteen practical answers for people who manage maintenance.
Alongside oils and greases there are specific products such as metalworking fluids, dielectric oils for transformers, compressor and turbine oils, heat transfer fluids, assembly and anti-seize pastes, and lubricants registered for incidental contact with food.
How to choose an industrial lubricant
The starting point is always the machine manufacturer's manual, which specifies the type of product, viscosity grade, specifications to be met and change intervals. When this information is missing, or the machine works in conditions other than those foreseen, the choice should take into account:
- the type of component: bearing, gear, slideway, chain, hydraulic circuit, compressor;
- speeds, loads and the presence of shocks;
- minimum and maximum operating temperatures;
- the environment: dust, water, chemical vapours, proximity to food or waterways;
- compatibility with seals, paints and the lubricant already in use;
- how the lubricant is applied and renewed.
Reduce the number of products
Many companies use more lubricants than they really need. A rationalisation plan, checking which products can cover several applications while respecting the manufacturers' requirements, reduces stock and the risk of topping up with the wrong product.
Safety, storage and disposal
Lubricants should be kept in their original containers, closed and labelled, in covered areas protected from water and dust, with containment trays for leaks. When handling them, avoid prolonged skin contact by wearing suitable gloves, always consult the safety data sheet and clean up spills immediately, as they make floors slippery. Used oils must never be released into the environment or burned: they must be collected separately and handed over to authorised collectors, as required by waste legislation.